FluoroPel 800M is a fluoroacrylic solution with fluorinated nanoparticles for coating membranes, glass, plastic and metal surfaces. Thin films dry in a few minutes at room temperature and provide a surface with a contact angle to water of approximately 140°. FluoroPel does not occlude pores and helps achieve high oleophobicity grades. Samples are for academic and industrial research use only.
Size: 125 mls Shelf life: Two years (in sealed unopened container) Application methods: Immersion, dipping, spraying, etc. Curing: Air dry at room temperature in 5 minutes (and bake 50°C for 10 minutes if possible). Let air dry for 4 hours prior to testing Appearance: Clear, odorless and colorless film Contact angle to water: ~140° Contact angle to oil: >100° Hardness: 2B pencil Flammability: Non-burning Heat stability: Continuous 150°C Max heat stability one hour: 250°C Refractive index: ~1.34 Toxicity of films: HMIS Rating Health = 1 Ease of application: Excellent Solvent/chemical resistance: Excellent after curing Transparent: No Electric conductivity: Yes (at <0.5 µm film thickness) Ease of drying: Dries at room temperature in <5 minutes