FluoroPel 300E is a fluoroacrylic copolymer solution in propylene glycol monomethyl ether acetate (PGMEA). This is used to coat glass, plastic and metal surfaces. Thin films dry in about 30 minutes at room temperature and provide a surface with a contact angle to water of approximately 105°. FluoroPel 300E is offered at 1%, 2%, 4% and 8% polymer. Please contact Cytonix for custom formulations or help with product selection.
Size: 125 mls Shelf life: one year (in sealed unopened container) Application methods: Immersion, spin, dipping, etc. Curing: Air dry at room temperature in 30 minutes (and bake 50°C for 10 minutes if possible) Appearance: Clear, odorless and colorless film Contact angle to water: ~110° Contact angle to oil: >25° Oleophobicity grade: >4 Hardness: >2B pencil Flammability: Non-burning Tracer: UV tracer for quality control (at request) Heat stability: Continuous 150°C Max heat stability one hour: 250°C Refractive index: ~1.34 Toxicity of films: HMIS Rating Health = 1 Ease of application: Excellent Solvent/chemical resistance: Excellent after curing Transparent: Yes Electric conductivity: Yes (at <0.5 µm film thickness) Ease of drying: Dries at room temperature in 60 minutes