FluoroPel 801UC is a fluoroacrylic copolymer solution in a fluorosolvent (BP=80°C) for coating membranes, glass, plastic and metal surfaces. Thin films dry in a few minutes at room temperature to a surface energy of about 10 dynes/cm. On membranes, mesh and filters, FluoroPel does not occlude pores and helps achieve oleophobicity grades up to 8. Formulations with fluorescent tracers are also available. Please contact Cytonix for custom formulations or help with product selection.
Size: 125 mls Application methods: Immersion, spin, dipping, etc. Curing: Air dry at room temperature in 60 seconds (and bake 50°C for 10 minutes if possible) Appearance: Clear, odorless and colorless film Contact angle to water: ~115° Contact angle to oil: >75° Surface tension: 8-12 dynes/cm Oleophobicity grade: >7 Hardness: >2B pencil Flammability: Non-burning Tracer: UV tracer for quality control (at request) Heat stability: Continuous 150°C Max heat stability one hour: 250°C Refractive index: ~1.34 Toxicity: HMIS Rating Health = 1 Ease of application: Excellent Solvent/chemical resistance: Excellent after curing Transparent: Yes Electric conductivity: Yes (at <0.5 µm film thickness) Ease of drying: Dries at room temperature in <5 minutes