CONTACT FORM | 301-470-6267

FluoroPel 300E

FluoroPel 300E

Regular price $39.00
Unit price  per 

FluoroPel 300 is a fluoroacrylic copolymer in propylene glycol monomethyl ether acetate (PGMEA) for coating membranes, glass, plastic and metal surfaces. Thin films dry in a few hours at room temperature and provide a surface with a contact angle to water of approximately 105°. Heating will improve speed of film cure. On membranes, mesh and filters, FluoroPel does not occlude pores and helps achieve oleophobicity grades up to 7. Formulations with fluorescent tracers are also available. Please contact Cytonix for custom formulations with different solvents such as mineral spirits, butyl acetate, MEK, acetone or help with product selection.

Size: 125 ml
Shelf life: One year (in sealed unopened container)
Application methods: Immersion, spin, dipping, etc.
Curing: Room temperature 10 mins (bake 60°C for 10 min if possible)
Appearance: Clear, odorless and colorless film
Contact angle to water: ~105°
Contact angle to oil: >25°
Oleophobicity grade: >6
Hardness: >2B pencil
Flammability: Non-burning
Tracer: UV tracer for quality control (at request)
Heat stability: Continuous 150°C
Max heat stability one hour: 250°C
Refractive index: ~1.34
Toxicity of films: HMIS Rating Health = 1
Ease of application: Excellent
Solvent/chemical resistance: Excellent after curing
Transparent: Yes
Electric conductivity: Yes (at <0.5 µm film thickness)
Ease of drying: Dries at room temperature in <5 minutes