PFC 1601V is a one percent fluoropolymer solution in a fluorosolvent (BP=160°C). Thin films dry in 4-6 hours at room temperature to a surface energy of about 16 dynes/cm. Heating to 180°C for 30 minutes optimizes adhesion and reduces the surface energy to about 10 dynes/cm. PFC1601V is recommended for spin, spray or blott applications where extreme UV resistance is needed. The no charge addition of 2 percent fluorosilane or fluorophosphate is recommended for application to oxide surfaces. PFC 1601V is a great coating for electrowetting devices.
Size: 25 grams Shelf life: Two years (in sealed unopened container) Application methods: Immersion, spin, dipping, etc. Curing: 10 minutes when bake 180°C Appearance: Clear, odorless and colorless film Contact angle to water: >115° Contact angle to oil: >65° Hardness: >2B pencil Flammability: Non-burning Heat stability: Continuous 150°C Max heat stability one hour: 250°C Refractive index: ~1.34 Toxicity of films: HMIS Rating Health = 1 Ease of application: Excellent Solvent/chemical resistance: Excellent after curing Transparent: Yes Water contact angle: ~120 Dielectric constant (@ 100 MHz): 1.9