FluoroPel 1300AC is a fluoroacrylic copolymer in a fluoro-solvent solution for coating membranes, glass, plastic and metal surfaces. Thin films dry in a few minutes at 130°C and provide a surface with a contact angle to water of approximately 110°. On membranes, mesh and filters, FluoroPel does not occlude pores and helps achieve oleophobicity grades up to 8. Formulations with fluorescent tracers are also available. Please contact Cytonix for custom formulations with different solvents such as mineral spirits, butyl acetate, MEK, acetone or help with product selection.
Size: 150 grams (~125 ml) Shelf life: Two years (in sealed unopened container) Application methods: Immersion, spin, dipping, etc. Curing: Bake 130°C for 10 minutes Appearance: Clear, odorless and colorless film Contact angle to water: ~110° Contact angle to oil: >25° Oleophobicity grade: >7 Hardness: >2B pencil Flammability: Non-burning Tracer: UV tracer for quality control (at request) Heat stability: Continuous 150°C Max heat stability one hour: 250°C Refractive index: ~1.34 Toxicity of films: HMIS Rating Health = 1 Ease of application: Excellent Solvent/chemical resistance: Excellent after curing Transparent: Yes Electric conductivity: Yes (at <0.5 µm film thickness) Ease of drying: Dries at room temperature in <5 minutes