FluoroPel 420-F25M is a fluoroacrylic copolymer solution in a fluorosolvent for coating circuit board components to prevent corrosion, tin-whiskers and dendrites. Films dry in a few minutes at room temperature and provide a surface with a contact angle to water of approximately 100°. This may be used as a Parylene replacement. Please contact Cytonix for custom formulations with different solvents and functional properties.
Size: 125 mls (150 grams) Shelf life: 2 years (in sealed container stored at 0 °F) Application methods: Syringe, immersion, spin, dipping, etc. Curing: Air dries at room temperature in 5 minutes (and bake 60°C for 30 minutes in high humidity chamber if possible). Cures in 12 hours. Appearance: Clear, odorless and colorless film Contact angle to water: ~110° Contact angle to oil: >40° Oleophobicity grade: >6 Hardness: >2B pencil Flammability: Non-burning Heat stability: Continuous 150°C Max heat stability one hour: 250°C Refractive index: ~1.34 Toxicity of films: HMIS Rating Health = 1 Ease of application: Excellent Solvent/chemical resistance: Excellent after curing Transparent: Yes Ease of drying: Dries at room temperature in 60 minutes